 |
 |
Measured Parameters |
 |
The image shown to the left is the standard display on all Alicat MC series mass flow controllers. The diplay shows mass flow in the center in large
numerals. In the top left corner real time gas pressure is displayed in PSIA, in the top center real time gas temperature is displayed in degrees C, in the top right corner
is the current control set point as a percentage (In Alicat M series mass flow meters the set point is replaced with the tare function. To tare the device you simply
press the button on top of that screen position), in the bottom left corner is volumetric flow information, and in the bottom center is mass flow reading.
Any of the displayed parameters can be moved into the center position at your choosing.
|
 |
All of the displayed process parameters are measured in real time which allows you to look at the device display and quickly get an idea of how your process
is operating. When a process begins to fail this information can drastically reduce the amount of time it takes to diagnose and repair the failure
|
|
|